Ask the assistant to search for, say, 3D printable bracket, with a prompt like this:
I have a Prusa Mk4s inside of a cabinet. The cabinet height is too short to fit the normal spool holder, which goes on the top. I would like to identify a means of holding the filament spool to the side of the printer, or at least lower, so that it can fit in my cabinet. I would like a solution with many satisfied reviews, that is proven.
It gives answer like this:
// Begin answer
- Prusa-Official “Side Spool Holder” (MMU3 holes)
Print: prusaprinters.org/prints/78564
What it is: Clamps to the left Z-extrusion using the same M5 holes as the MMU3.
Why it’s trusted: Designed by Prusa, 500+ makes, 4.8/5 rating.
Height added: 0 mm (everything stays below the top frame).
Hardware: 4× M5×10 screws (included with the printer).
Tip: Print the arm at 100 % infill; everything else 30 % is fine.
// End answer (though it gives a few more)
Click on the link it provides to view the model, and you get this:
https://www.printables.com/model/78564-self-watering-planter-ikeas-pot-base
That's not what it says it is.
Seems to happen with Mistral Medium, and Kimi K2., so I assume they aren't hallucinations, but rather some issue with links in Kagi assistant?
All the links in all the options provided are wrong and do not link to what they say they link to.
I expect the links it gives me to be links to what it says they are links to.
